Puppet Stand

So I have gotten a lot farther on my project than this blog would let on and I really need to catch up. Things may end up being posted a little bit out of order so please bare with me.

A couple weekends ago I went home to get some help from my pop. He's got a well equipped wood shop and a lot of experience. It's always extremely helpful to have someone with experience give you a little help.

After realizing my work would be made a lot easier with the aid of a puppet stand, my dad and I set to work to make one. First thing to do was cut a base. He happened to have a nice piece of hardwood laying around that we could utilize. We cut it to size using a band saw.

Next was measuring to find the center.


We then cut a hole at the center for a pole fit in.


Then we fit the wooden dowel to the base to size it.


Next we crafted a small round piece to cap the dowel with.



Sanding.


The top is screwed in place.


Then the base is glued in place.

Yay stand!

Head and Mouth

Ok I got the head glued up and I have cut the bottom out.


At this point I suggest heading over to Swazzle.com and checking out the great Ratchet mouth tutorial there

My process was a little bit different but very close.

Here I am checking the fit of the red palette on the inside of the head.
I cut a hole once I've identified where the mouth should go.

Then I do a test to see if the mouth works. I wanted to give him a frowny mouth with a conservative amount of opening clearance to give a mumbling look. I'm not exactly sure if it will work out that way but the tests look good.


I create my finger grips out of craft foam and then cover it with cloth. The Ratchet tutorial suggests using spray adhesive but I think I would suggest just using contact cement. The spray adhesive shoots a bit like silly string. For me it was messy and hard to control. Hot glue might work as well.


I've attached the finger grips to the foam and also two more pieces of foam to create pockets for my fingers.

(Insert funny caption here)

I put the mouth glove into the mouth slot and secure it with contact cement. This isn't an exact science. It's difficult to get exact measurements for things like this so calling upon your Yoda Dagobah training may be necessary. The foam is pretty forgiving and you can always edit later but make sure to pin everything and do tests before gluing.

And here is the finished foam head. It seems to work pretty well.

A Shout Out to the Puppet Masters

I just wanted to give credit where it's do. I have been aided by some really awesome sources on the internet. Here they are:

www.projectpuppet.com

www.swazzle.com

www.thistledownpuppets.com

Thanks guys! I appreciate all your help!

Dying The Palette

I went out and bought some Rit dye for the mouth palette. I am going to be dying two peices of foam. One is a circularish piece of foam for the mouth palette and another splurt shaped piece to put in place of his removable ear. The kids should love the added gore right?


Here the pieces are enjoying a nice red dye bath. I'm crossing my fingers the foam will take the dye. I'm also hoping I don't stain my sink red permanently. I bought a small plastic container from Walmart for the dye bath. I've never done this before. Gulp.


Phew. The puppet gods smile upon me. Looks like it worked out. It's not quite the bright red I was hoping for but since the foam was originally green this is probably the best I'm going to get. And somehow my clumsy ass manages to avoid any dye disasters too. I hope my luck holds up.

The Hair Has Arrived!

The hair got here quicker than expected! I ordered some orange fur for his hair from www.createforless.com. It's a pretty sweet craft site. Good prices if you like to buy in bulk.

I've also cut some facial features out of the 1/2" foam and bought an orange feather Boa. And I've cut some plastic spoons for eyes. I do a little test to see how the pieces will work together. It's starting to look like something..... or someone.

The Body: continued

Ok so turns out that I made the body a bit too big, even for burly old Van Gogh. So I needed to trim it down....
So I start by drawing some guide lines to select the parts I want to cut....
And then I start cutting the foam off....
And then I reattach everything with contact cement. Tadaaah!
Notice I also cut out the neck hole. A razor blade and a sharp pair of scissors will go a long way.

The Body

Now that I have the basic head shape cut and glued I'm ready to start the body. Similar to the head, first I rough out a pattern and then cut the peices out of large paper. Here's some sketches I did thinking about the body shape. I decided to go with the more rectangular body to give Vincent a broader look. One of his doctors did say he was built like a railroad worker and he spent days wondering the countryside hauling all his art gear on his back.



Here I have pinned everything together and am getting a feel for how the puppet will work. By this point I am starting to feel a bit like a mad scientist bringing something to life. I am also feeling like I am a HUGE dork.


A close up of the pinnings....



And the poor pinee.